SPECTRA PRECISION FOCUS 2 SERIES TOTAL STATION USER GUIDE
4 –
Routine Measurements
52
The
HA Hold
screen appears. Use the horizontal clamp
and horizontal tangent screw to sight the target.
4. Press
[REC/ENT]
to set the horizontal angle of the target.
Quick codes
Quick codes (Qcodes) enable measuring and recording of many points with feature codes in the field.
Using the quick code function, a predefined code can be called up directly via numeric keypad on the
instrument. The code is selected by entering a two digit number, by pressing
[MSR1]
the measurement
is triggered and the measured data and code saved.
A total of 256 quick codes can be assigned. Each code can be assigned a unique one/two/three digit
numbers. If no numbers are allocated to the codes, the code is selected in accordance with the order
in which the codes were entered in the code list (for example, 01 = first code in the code list, 10 =
tenth code in the code list). For more about editing quick codes, see Adding a code, page 120. You
can also use the included Data Transfer software to create and upload codes. See Code list, page 148.
1. To activate Quick code measurement mode, press
[MODE]
in the Basic Measurement screen.
2. Enter the numeric value assigned to the quick code and then press
[REC/ENT]
.
3. The system starts searching the numeric values to find
the quick code in its internal memory. To find the quick
code corresponding to the numeric value, press
[MSR1]
.
After measuring, the result and quick code are displayed.
If the quick code corresponding to the numeric value
does not exist in internal memory, it will display
Code no
exist
.
If no quick code is allocated to the numeric value, the Quick Code is numbered in accordance
with the order in which the codes were entered in the code list.
4. While measuring, the quick code to be recorded is
displayed in the CD field.
5. To quit the quick code function and return to the Basic
Measurement screen from the
Qcode
screen, press
[MODE]
again.
