SPECTRA PRECISION FOCUS 2 SERIES TOTAL STATION USER GUIDE
6 –
Menu Key
107
A recording point screen with the calculated coordinates
appears. PT defaults to the last recorded PT + 1.
5. Enter the code (CD) and then press
[REC/ENT]
to store the
point.
Store
The store function calculates a new point based on two defined points and angle, horizontal, and
vertical distances from the line defined by those two points.
1. From the
AZ&Dist
menu, press
[2]
(or press
[v]
and
[REC/ENT]
) to select
Store
.
The
Input P1
screen appears.
2. Enter the point name P1 and then press
[REC/ENT]
.
For the input method, see Step 2 of the Inverse PT-PT
method on page 104.
The
Input P2
screen appears.
3. Enter P2 and then press
[REC/ENT]
.
The
Input+AZ
screen appears.
4. Enter the plus-minus angle, horizontal distance (HD), and
vertical distance (dVD) from the baseline defined by P1-
P2. If you do not enter a value in the dVD field, the value
0.0000 is used.
5. When
[REC/ENT]
is pressed in the dVD field, a new point is
calculated. The PT name defaults to the last recorded PT
+ 1. Press
[REC/ENT]
to record the point.
6. The screen returns to the point input screen. P1 (base
PT) defaults to the previously recorded PT. P2 defaults to
the previous P1.
