SPECTRA PRECISION FOCUS 2 SERIES TOTAL STATION USER GUIDE
4 –
Routine Measurements
48
Starting a survey
After verifying all settings, a survey can be started. The survey results are displayed in four screens
including all data for a routine survey. Press
[DSP]
to view the data. If a second distance unit is set, an
additional
HD/VD/SD
screen appears.
Before storing measurements, a job, a station, and a backsight azimuth must be set.
1. Sight to the center of target prism, press
[MSR1]
or
[MSR2]
.
2. While the instrument is taking a measurement the prism
constant is displayed in the distance field.
The measurement results are displayed in four screens,
including all normal measurement data such as angle,
distance, and coordinates.
3. Press
[DSP]
or
[v]
or
[^]
to view each screen.
If the secondary distance unit is set, another screen
appears.
To change the height of the target (HT), the temperature, or the pressure, press the
[HOT]
key.
Settings that relate to corrections (T-P, Sea level, C&R) are included in the job settings. These settings
are job-specific. Changing any item will create a new job or close the current job.
The maximum data storage capacity is defined by the type of data being stored. The maximum is
10,000 points complete with raw data.
