Speco VM17LED, Manual

Page: 10 / 14

10
1DU00L5B-A.0
4 Caring for Your LED Monitor
Caring for your LED Monitor
The LED color monitor is a sensitive piece of electronic
equipment. Proper care can prevent accidentally damaging
the LED panel or the monitor itself. By following these guidelines
you can ensure many years of trouble free use.
1. The LED monitor's plastic casing and LED glass panel can be
cleaned with a soft, lint-free cloth. Never use scrub pads or
other cleaning materials with abrasive surfaces to clean your
LED monitor!
a. A slightly damp cloth or newspaper may be used to
clean the glass plate of fingerprints or smudges.
b. For the plastic case, a mild detergent may be used to
clean the surface. However, you should ensure not to
use too much detergent or water as this could leak into
the interior of the casing.
2. Do NOT use cleaning fluids based on alcohol, methylated
spirit, or ammonia. The glass plate has a hard surface coating
to prevent scratches. However, the use of strong chemical
cleaning agents may damage this coating. Use only a mild
soap or detergent and water or specially formulated cleaners
made for cleaning glass panels.
3. Avoid direct contact with water or other liquids. Never use
the LED monitor in or around areas where water may pose a
potential hazard to normal operation.
4. Only use the LED monitor indoors, and avoid monitor contact
with oil, vapor, steam, moisture and dust. The LED monitor
should be used in a clean and low humidity environment.
5. Keep the LED monitor away from heaters or other heat
sources such as lighting equipment or direct sunlight.
6. Keep the LED monitor away from sharp object to touch the
screen like fingernail and pencil.
WARNING: Any unauthorized modification to this equipment
could result in the revocation of the authorization to operate the
equipment and void the product warranty.