Playback & Backup
NVR User Manual
47
Button
Meaning
Click it to go to the intelligent analytics interface.
Click it to go to record search and export interface; see 8.4 Record Search,
Playback & Backup for details.
Click it to Go to the live view interface; see Chapter 5 Live View Introduction
for details.
Click on the playback window to show the tool bar as shown in area ③; right click on the window to show the menu list. The tool bar and menu list
are introduced in the table below.
Button
Menu List
Meaning
--
Move tool. Click it to move the tool bar anywhere.
Enable Audio
Click it to enable audio. You can listen to the camera audio by
enabling audio.
Snapshot
Click it to snap.
Zoom In
Click it to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live view interface.
Click
to pause the record playing; click
to play the
record. When the record is paused in forward playing mode, you
can click
to view the previous frame and click
to
view the next frame.
Add Tag
Click it to add tag. You can play back the record by searching the
added tag. Click it and then enter the tag name in the popup
window. Click “Add” to add tag.
Switch Camera
Click it to switch the playback camera. Click it and then check the
camera in the popup window. Click “OK” to change the camera.
Close Camera
Click it to close the playback camera.
Introduction of area ④:
You can check the record type as required for record playback; first you should click
on the tool bar at the bottom of the interface to clear all
the playback camera, then check the record type (
: manual record;
: sensor based record;
: motion based record;
: schedule record;
: analytics record; and finally click
in the playback window to add camera for playback (the record time scale will show the record data of
the checked record type only after the above operations).
Introduction of the record time scale (area ⑤):
Click
to set the date; click
to set the time and then the playback camera will play the record from the time you set.
A tool bar will appear after moving the mouse to the record time scale. Click
/
to zoom the timeline; click
to recover the timeline
to 24 hours’ ratio. Drag the timeline or slide the scroll wheel of the mouse on the time scale to show the hidden time on the top or bottom of the
timeline. You can also click
to show the hidden time on the top of the timeline or click
to show the hidden time on the bottom of the
timeline. Drag the slider at the bottom of the time scale to show the hidden playback cameras.
The record time scale shows different record types with different colors. The green block stands for manual record, red block stands for sensor based
record, yellow block stands for motion based record, blue block stands for schedule record and cyan block stands for intelligence record. Click the
record block to set the time and then the playback camera will play the record from the time you set.
Summary of Contents for N32NRE
Page 124: ...FAQ NVR User Manual 117 Fig 11 2...
