Speco Intensifier K HTINT59K, Instruction Manual

Page: 25 / 44

24
3. WHITE BALANCE
Use this function when the color adjustment of a screen is needed.
1. Move the triangular indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the left or Right button.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
RETURN
DC
ATW
OFF
MIDDLE
AUTO
MANUAL
KELVIN
R-GAIN
B-GAIN
RETURN
10
10
IIIIIIIIII IIIIIIIIII
|
IIIIIIIIII IIIIIIIIII
|
MIDDLE
Use the appropriate mode according to your purposes among these three modes.
* ATW Use this mode when the color temperature is from 1,800K to 10,500K.
* AWB The function to search for the color which is matched well with the ambient environment. This
be used when the color temperature is from 3,000K to 7,000K.
* AWC → SET After letting camera focus on the blank white paper to the best condition of current
lighting environment, press the SET button. If the lighting condition is changed, Re-adjustment
should be needed.
* MANUAL Manual compensation make the more detailed control possible. First, after adjusting the
white balance using the ATW or AWB mode, change the mode into the manual compensation mode
and then press Set button. While looking at the color change of the subject seen on the screen after
setting up the proper color temperature, increase the each value of the blue and the red.
:
:
:
: