Live View Introduction
DVR User Manual
18
Quickly Add
Check the cameras and then click “Add” to add cameras. Click
to edit the camera’s IP address, username, and password and so on. Click
“Default Password” to set the default username and password of each camera.
Add Manually
Enter the IP address or domain name (click
in the IP address column to pop up the domain name input window, enter the domain name of
the IPC in the window and then click “OK” button), port, username and password of the camera and then select the protocol. Click “Test” to test
the effectiveness of the input information and then click “Add” button (you can input one camera’s information or above such as IP address,
username, and password before clicking “Add” button). Click
to delete the camera. Click “Default Password” to set the default username and
password of each camera.
4.2.2 Edit Camera
Click “Edit Camera” in the setup panel to go to the interface as shown below. Click
to view the live image of the camera in the popup window.
Click
to edit the camera (see
Add camera
in 3.1 Startup Wizard for details). Click
to delete the camera. Click
in the “Operation”
