Operation Instruction
10
Menu Button
In the Live Monitoring mode and Search mode, pressing the
MENU
button displays the menu icons at the top of the screen.
Copy Button
Pressing the
COPY
button allows you to copy video clips.
Esc Button
During menu setup, pressing the
ESC
button closes the current menu or setup dialog box.
Play/Stop Button
Pressing the
PLAY/STOP
button enters the playback mode, and pressing the button again exits the playback mode. When
entering the playback mode, video is paused.
When in one of the multi-view formats, pressing this button enters the Triplex mode. The DVR supports the Triplex
function: monitoring, recording and playing back at the same time.
Alarm Button
The
ALARM
button has two functions. First, it will reset the DVR’s outputs including the internal buzzer during an
alarm. Second, it will display the event log when you are in the live monitoring mode unless there is an active alarm.
This operation can be user password protected.
Sequence Button
When in the live mode, pressing the
SEQ
button displays live channels sequentially.
PTZ Button
Pressing the
PTZ
button enters the PTZ (Pan/Tilt/Zoom) mode and the PTZ icon flickers. Pressing the button again
exits the PTZ mode. Pressing the arrow buttons or
MENU
button allows you to control properly configured cameras.
Mode Button
Pressing the
MODE
button toggles between different display formats. The available formats are: 2x2, 3x2, 3x3, 4x3
or 4x4 (2x2 or 4x4 on a Spot Monitor). Pressing the button while in the 4x4 display format of local cameras enters the
display mode of network devices, and pressing the button while in the 4x4 display format of network devices enters
the display mode of local cameras.
Arrow Buttons
These buttons are used to navigate through menus and GUI. You can also use them to change numbers by highlighting
a number in the menu and using the
Up
and
Down
arrow buttons to increase or decrease the number’s value.
These buttons are also used to control Pan and Tilt when in the PTZ mode.
Enter Button
The
(Enter) button selects a highlighted item or completes an entry that you have made during system setup.
Summary of Contents for D24GS
