Speco D24GS, Operation Instruction Manual

Page: 74 / 110

Operation Instruction
64
NOTE: The Live Monitoring menu also can be displayed by moving the mouse pointer to the right edge of the
screen.
Live Monitoring Menu
Login/Logout
Selecting (Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to select a User
and enter the password to log into the system. Selecting (Logout) in the Live Monitoring menu displays the Logout
screen asking you to confirm whether or not you want to log out the current user
.
Monitor
Selecting (Monitor) in the Live Monitoring menu will allow you to select the monitor from Primary , Secondary
and Spot . Selecting Primary displays , Secondary displays and Spot displays . You can select the screen
format and sequence monitoring of the selected monitor.
Display
 Local Camera: Selecting (Display) → Local Camera and choosing the camera number displays the selected
local camera full screen. It is the same as pressing the individual camera buttons on the front panel or clicking the
left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 3x2, 3x3, 4x3 or 4x4). Clicking
the left mouse button on the screen again returns to the previous display mode.
 Network Camera: Selecting (Display) → Network Camera and choosing the camera number displays the
selected network camera full screen. It is the same as pressing the individual camera buttons on the front panel or
clicking the left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 3x2, 3x3, 4x3 or
4x4). Clicking the left mouse button on the screen again returns to the previous display mode.
NOTE: “Network Camera” includes both network cameras and network video transmitters.
When video from network devices is not displayed on the screen, check the current video resolution.
DVR’s supported resolutions are 352x240(352x288), 704x240(704x288), 640x480, 704x480(704x576),
800x600, 1280x720, 1280x960, 1280x1024 and 1920x1080.
When monitoring video from network devices in the multiview display formats, video at the resolution
higher than 704x480 will be displayed 1 image per second.
 Screen Format: Selecting (Display) → Screen Format and choosing the screen mode displays the cameras in
the selected multiview screen mode (2x2, 3x2, 3x3, 4x3 or 4x4). Selecting Screen Format while in 4x4 display
format for local cameras enters the display mode for network devices, and selecting Screen Format while in 4x4
display format for network devices enters the display mode for local cameras. Selecting each display mode is the
same as pressing the
MODE
button or scrolling the mouse wheel up and down when in one of the multiview formats.
 Previous Group, Next Group: Selecting (Display) → Previous Group or Next Group moves to the previous
or next page. Selecting Next Group while in 4x4 display format for local cameras moves to 4x4 display format for
network devices, and selecting Previous Group while in 4x4 display format for network devices moves to 4x4 display
format for local cameras.
 Edit Group: Selecting (Display) → Edit Group enters to the Active Cameo mode. Refer to the following
Active Cameo Mode section for details.
 Camera OSD, Status OSD:
Selecting (Display) →
Camera OSD
or
Status OSD
toggles Camera OSD
or Status OSD On and Off.
Freeze
Selecting (Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select again.
While in the Freeze mode, the icon displays in bottom-left corner if Freeze is selected in the Display setup screen
(OSD tab).