Speck BADUJET Riva, Operating Instructions Manual

Page: 49 / 227

5 Installation
05/2013 VG 766.2330.061 EN 49
5.2 Assembly Recommendation
Division 2 Division 1
Division 2 (1,5m)
Division 1 (2m)
Empty hose for powe cable
Earth
Distance equalization
Division 0
Division 0
Division 1
2,5m
See point 5.4
(Acc. to EN 13451)
≤45 mm
5.3 Electrical Connection
WARNING! Hazards resulting from electrical power are to be prevent-
ed.

VED and EVU specifications and by-laws of the local power supply
company must be followed.

The swimming pool and its protective area must be in accordance
with DIN VDE 0100-702.

A disconnecting device has to be installed to cut off the power sup-
ply (contact opening according to the conditions of the overvoltage
category III).
WARNING! Voltage on the housing may cause electric shock.

Set the motor protection overload switch settings. Take the values
on the type plate into consideration.

Protect the electric circuit by means of an earth leakage switch:
residual current I
 N

30 mA.

Only use cable types pursuant to the regional regulations.

Check that the min. diameter and length of the cable used is suita-
ble for the current drawn by the motor. See values on the motor ty-
pe plate.