Speck BADUJET Riva, Operating Instructions Manual

Page: 42 / 227

2 Safety
42 EN VG 766.2330.061 05/2013
2.7 Other Risks
2.7.1 Falling Parts
The motor suspension rings are only intended for the weight of the
motor and are not intended for carrying the weight of a complete over-
hang counter swim unit. The suspension rings may break out.

The device must be mounted on the base plate.

Only use suitable and technical appropriate hoists and load bearing
materials.

Do not linger under swinging loads.
2.7.2 Rotating Parts
Risk of injury due to open rotating parts can result in cuts and bruises.

Always disconnect the energy supply to the product first before
installation, maintenance and repairs. Secure this disconnection.

Immediately following completion of the work, all safety-relevant and
protective devices must be re-installed and/or re-activated.
2.7.3 Electrical Power
During work on the electrical system, there is an elevated danger of
shock due to the moist environment.
Improper installation of the electrical earth protection wire can lead to
shock: e.g. through oxidation or cable breakage.

Hazards resulting from electricity are to be prevented. VED and
EVU specifications and by-laws of the local power supply company
must be followed.

The swimming pool and its protective area must be in accordance
with DIN VDE 0100-702.

Take the following precautions before working on the electrical
system:
– Separate the unit from the power supply. Secure the separation.
– Display a warning sign: "Do not start up! Work in progress on the
system."
– Ensure there is no voltage.

Check the unit regularly to ensure it is in operating order.