5
Installation
48
EN VG
766.2330.061
05/2013
5 Installation
5.1 Location
5.1.1 Mounting
site
Select the mounting site and prepare in accordance to page 62
figure 6. If the unit is being installed on an above ground pool, the
telescope safety support must be used. See page 64, figure 9.
5.1.2 Checklist
Check the unit contains all parts listed on the packing list.
5.1.3 Position
Set the unit on the edge of the pool and mark the mounting holes.
5.1.4 Securing
the
unit
Lift the unit and drill the holes of Ø 10 mm on the markings.
5.1.5
Insert the brass dowels
Insert brass dowels (25) and screw on the vibration rubber metal
buffer (26) - see page 63 figures 7 and 8. Make sure that the bolts
with the buffers are securely anchored in the base, so that the unit
sits securely.
5.1.6
Secure the unit
Set the unit on the vibration buffers and secure it with the hexagonal
bolts (32), toothed lock washers (31) and flat washers (30): See
page 63 figures 7 and 8.
5.1.7 Distance
equalization
Equalize the distance between the housing and the pool edge This
adjustment gives the unit added stability.
5.1.8 Power
supply
Before connecting the power supply carefully read and complete
point 5.3 - Electrical connection and point 5.4 - Additional parts not
provided for.
Summary of Contents for BADUJET Riva
