Safety
11|2016 EN
11
2.9.4 Blockages in the pump
Dirt particles can clog and block the pump.
Do not install the pump on the bottom of the well/cistern.
Pos: 42 /Technische Dokumentation/Betriebsanleitung/Sicherheit/Vermeidung von Schäden/Frostgefahr @ 3\mod_1442306015773_370.docx @ 46431 @ 3 @ 1
2.9.5 Risk of frost
Drain the pump/unit and pipes at risk of freezing in plenty of
time.
Remove the pump/unit during periods of frost and store it in a
dry room.
Pos: 43 /Technische Dokumentation/Betriebsanleitung/Sicherheit/Vermeidung von Schäden/Wassertemperatur 35 °C @ 1\mod_1429098446026_370.docx @ 28002 @ 3 @ 1
2.9.6 Water
temperature
The water temperature must not exceed 35 °C.
Pos: 45 /Technische Dokumentation/Betriebsanleitung/Sicherheit/Vermeidung von Schäden/Sichere Nutzung des Produktes Multi @ 4\mod_1449223729904_370.docx @ 54467 @ 3 @ 1
2.9.7 Safe use of the product
Safe use of the product is no longer guaranteed in the following
instances:
If the pipework is not in proper condition.
If the pump seizes.
If protective devices are damaged or missing, e.g. protection
against accidental contact.
If there is stress on the pump/unit or pipes during installation.
If the pump/unit is not installed correctly.
If there is a technical fault.
Pos: 46 /Technische Dokumentation/Betriebsanleitung/Sicherheit/D90.04.264-P @ 7\mod_1470293084041_0.docx @ 89177 @ @ 1
