Safety
11|2016
EN
9
Pos: 27 /Technische Dokumentation/Betriebsanleitung/Sicherheit/Restrisiken/Restrisiken @ 0\mod_1427723332615_370.docx @ 26639 @ 2 @ 1
2.7 Residual
risk
Pos: 28 /Technische Dokumentation/Betriebsanleitung/Sicherheit/Restrisiken/Herabfallende Teile TOP @ 6\mod_1458650682706_370.docx @ 78837 @ 3 @ 1
2.7.1 Falling
parts
Suspend the pump unit from the handle.
Only use hoisting and load-bearing equipment which is
suitable and technically sound.
Do
not
stand
under suspended loads.
Never lift or transport the pump/unit using electrical
connection cables.
Pos: 29 /Technische Dokumentation/Betriebsanleitung/Sicherheit/Restrisiken/Rotierende Teile - GSA @ 1\mod_1429096331026_370.docx @ 27892 @ 3 @ 1
2.7.2 Rotating
parts
There is a risk of shearing and crushing due to exposed rotating
parts.
Only perform servicing when the pump/unit is not in
operation.
Prior to servicing, ensure the pump/unit cannot be switched
back on.
Immediately after finishing servicing, reattach or reactivate all
protective equipment.
Pos: 30 /Technische Dokumentation/Betriebsanleitung/Sicherheit/Restrisiken/Elektrische Energie - Zismatic @ 3\mod_1442305192268_370.docx @ 46356 @ 3 @ 1
2.7.3 Electrical
energy
There is an increased risk of electric shock when working on the
electrical system due to the humid environment.
Electrical protective earth conductors which were not installed
correctly can also result in electric shocks, for example oxidation
or cable breakage.
Observe VDE and utility company regulations.
Before working on the electrical system, take the following
measures:
– Disconnect
system
from the power supply.
– Attach
a
warning
sign: “Do not switch on! The system is
being worked on.”
– Ensure
that
the
system is free of voltage.
Check the electrical system regularly to ensure it is in proper
working condition.
Pos: 31 /Technische Dokumentation/Betriebsanleitung/Sicherheit/Restrisiken/Heiße Oberfläche Pumpe @ 3\mod_1440423336222_370.docx @ 40223 @ 3 @ 1
2.7.4 Hot
surfaces
During operation the pump can become very hot. Therefore there
is a danger of being burned.
Do not touch the pump during operation.
Allow the pump/unit to cool down before servicing it.
