10/2012
VG 766.2100.060
31
The speeds (n1/n2/n3/n4) can be set in the "Custom Flow 1, 2, 3, 4" item.
For
"Custom Flow 1, 2"
– Speed 30% - 100%
"Custom Flow 3"
– Speed 30% - 100% = backwash speed
"Custom Flow 4"
– Speed 0% = Stop
Low
High
-----------------------------------------
Priority ------------------------------------------------
Æ
"Custom Flow 1"
"Custom Flow 4"
Î
The "Custom Flow 4" speed must be set to 0%.
Î
Set the pump to "Run" to be able to control it externally.
Î
Set the backwash time on the timer relay, e.g. 3 minutes
(= BADU
®
EasyTronic).
Î
The speed during the priming time should correspond to the set speed
during the backwash, where applicable.
