EN
10/2012
VG 766.2100.060
21
User interface BADU
®
90/40 Eco MV-E
(1)
RUN / STOP
button. Used to start and stop the day/time programs. The button
lights up green when the program run is activated. It goes off when the motor
switches to stand-by mode.
This button does not disconnect the unit from the
mains!
(2) Selections are confirmed and saved by pressing the
Enter
button. The arrow
buttons are used to change the values. If a motor program is running, the
volumetric flow is increased or decreased in steps of 5% by pressing the arrow
buttons.
(3) The
Run MAX Flow / Vacuum
button is for cleaning, bottom vacuuming and other
skimming purposes. The program is run using the
Enter
button.
(4) Press the
Run Custom Flow
button to select a preset timer program. Programs
are started with the
Enter
button.
(5) The
Program Menu
button can be used to set the day of the week, switch on/off
times and flow rate.
(6) The
Exit
button is used to exit the programming menu or cancel a program without
saving changes.
