22
VG
766.2100.060
10/2012
(1) Current volumetric flow of the pump in percent. The selection range is between
30% and 100% and can be set in steps of 5%. Each time the pump is started, it
runs with a preset volumetric flow for a certain time (priming time). The priming
time can be set between 0 and 10 minutes. During this period, the "
Flow
" indicator
flashes in the display.
(2) "
MAX
" only appears if the volumetric flow is 100%.
(3) The days of the week are displayed.
(4) If the "
Call for Service
" symbol lights up permanently, the unit should be
disconnected from the voltage supply. See Chapter 2.2 of the original Operation
Manual "Non self-priming and self-priming pumps with/without plastic lanterns
(AK version)".
(5) Current time or ON time in programming mode is displayed.
(6) The OFF time in programming mode is displayed.
(7) Displays the remaining time of the timer programs or the time to be set in
programming mode.
