26
VG
766.2100.060
10/2012
4 Use the "Enter" button to confirm all
settings as soon as they are made.
Begin with Point 2 to set another
program.
5 Press the "Exit" button to return to
stand-by mode. The program run is
switched on by pressing the "RUN /
STOP" button. The button should
light up green.
Setting the priming time
1 The right arrow and "Exit" button
must be pressed and held
simultaneously for approximately
2 seconds to access the menu for
the priming time.
Settings can only be made when
the pump is in stand-by mode.
2 The priming time can be set by
pressing the "Enter" button.
Volumetric flow
: 30-100%
Time: 0-10 minutes
