13
Spearhead XRHD
250/270/300
5. Put the 3-point linkage into the position that moving of the
machine during transport is not possible.
6. During transport secure the lever of hydralic lift to avoid any
unplanned moving the machine.
7. Never leave the tractor cab when the tractor is working.
8. Adjust driving speed to the road conditions.
3.3 PTO
drive
1. Use only PTO shafts with all guards, as directed by the producer.
2. All guards on PTO shaft must be in good order .
3. Take care that all guards on the PTO shaft are in proper position
during transport or operating. Respect the producer's instructions.
4. The PTO shaft must be assembled or diassambled only with the
engine stopped and the starting key removed.
5. The guards of the PTO shaft must be fixed to the machine and to
the tractor with chains, to prevent rotation.
6. Before starting always check that the speed and the rotational
direction correspond to those on the machine.
7. At some tractors a number of rotations depends on the speed and
a direction of rotating depends on the direction of driving. Take
care about that.
8. Before starting the PTO shaft be sure, that noone is in the danger
area.
