31
Spearhead XRHD
250/270/300
That the frame and the 3-point hitch are in good condition,
That all parts are greased well.
3. On every 100 hours we recommend to:
Check and grease the PTO shaft
4. On every 12 months we recommend to:
Change the oil in the gearbox and check the belts tension.
9.5 Replacement of working tools
Immediately after you notice that working tools are damaged, change
them. If it is necessary to change only few blades, always change the
broken or worn one and the one diametrically opposite in order to
maintain the balance. If the rotor shaft is vibrating after changing the
blades, immediately stop the machine. The machine must be balanced
before any work.
9.6 At the end of the season
At the end of the season we recommend to clean the complete
machine, change eventual broken or worn parts, tighten the bolts, the
belts, grease the parts and oil the parts with damaged colour. Put the
machine on a dry and flat ground.
9.7 Demolition when out of order
If the machine is out of order, all its parts that might cause dangers
have to be made inoffensive. Materials, forming the machine that have
to undergo a differentiated division, are:
a. steel
b. mineral oil
c. rubber
