TWIGA CLASSIC S50
43
Washing Your Machine
Grease all your machine and optional parts after each time you wash your
machine.
Gearbox
Before first use check gearbox oil level, thereafter check every 8 hours. After
the first 50 hours drain and replace the gearbox oil, thereafter annually.
Replace with EP90. Do not over tighten oil plugs, as this will damage the
housing.
P.T.O.
Dismantle; clean the input drive shaft sliding surfaces and re-grease, failure to
do this will result in serious damage to the gearbox. Grease both U.J. joints
every 8 hours.
Oil Requirements
Fill the tank to centre of sight gauge with approximately 220 litres of HD46 or
equivalent oil. Do not over fill.
Torque Settings
The Torque figures given below are recommended maximum settings only.
Size:
Tensile strength:
Description:
Torque setting:
Nm.
M10
8.8
General fasteners
65
M12
8.8
General fasteners
114
M12
12.9
Head bolts
170
M12
10.9
Flail bolts
100
M16
8.8
Head bracket bolts
280
