TWIGA CLASSIC S50
35
Auto Pilot Switch Alignment
Alternative Settings
Warning
If the working range is altered the spring length on the damper may need adjusting
to compensate.
Note: The basic factory setting for the spring length is 200mm
Bend lever arm of switch to
align with the middle of
each cam, ensure they
don’t overlap onto the
adjacent cam.
Move the cams apart to increase
amount of weight carried on the
rear roller, thereby reducing the
sensitivity of the auto-pilot
If the cams are too close together
the switches will constantly be
altering the main arm height
causing unnecessary wear and
strain on the hydraulics
.