18
AFTER SALES SUPPORT
0345 605 2067
PREPARE
Clean surface around fuel cap to prevent contamination.
Loosen fuel cap slowly. Rest the cap on a clean surface.
Carefully pour fuel into the tank. Avoid spillage. Prior to
fastening the fuel cap, clean and inspect the seal located
inside the fuel cap. Immediately replace fuel cap and
hand tighten. Wipe up any fuel spillage.
NOTE!
It is normal for smoke to be emitted from a
new engine after first use.
FILLING THE LUBRICATION OIL
Whenever you refill the fuel tank with petrol you must
also top up the level of chain oil in the chain oil reservoir.
Use special chainsaw oil to lubricate the saw chain.
NOTE!
Most stores will sell acceptable oil under
the name “Chainsaw chain oil”.
Important!
The fuel mix is added into fuel tank(C),
chain lubrication oil is filled into oil reservoir(D).
Seal one cap prior to removing the second cap.
If you put the fluid into the wrong tank seek
assistance from an expert immediately.
Warning!
Lack of chain oil will seriously damage
the chain.
C
D
