26
OPERATING THE Vital 710
Volume
With the Vital 710 power ON turn the Volume Knob
on the Vital 710 Front Panel or press the Volume
UP/Down buttons on the Vital 710 Remote to adjust
the speaker level audio output. Turn clockwise (right)
to turn volume up; turn counterclockwise (left) to
turn the volume down. The audio output level in dB
(decibels) will be displayed on the Front Panel Display
while the knob is being turned and for five seconds
after a volume adjustment is made.
mute
With the Vital 710 power ON and with any source
selected, press the Mute button on the Vital 710 Front
Panel or Remote to cut the amplifier output to the se-
lected speakers. (There will be no sound coming from
the speakers.) MUTE will slowly flash on the Front Panel
Display. Press the Mute button again to un-mute the
speakers.
SP. A
Figure 25
Volume/Mute
SP. A
Tone and Balance Controls
Bass
Turn the Bass Knob on the Vital 710 Front Panel to
adjust the bass (low frequencies) in the speaker level
output. Turn counterclockwise (left) to reduce bass;
turn clockwise (right) to increase bass. Center de-
tente (click) is flat bass EQ.
Range: +/-10dB.
Treble
Turn the Treble Knob on the Vital 710 Front Panel to
adjust the treble (high frequencies) in the speaker
level output. Turn counterclockwise (left) to reduce
treble; turn clockwise (right) to increase treble. Center
detente (click) is flat treble EQ. Range: +/-10dB.
Balance
Turn the Balance Knob on the Vital 710 Font Panel
to adjust the relative audio level between the left
and right speakers. If the speakers are positioned so
that they are not an equal distance from the Primary
Listening Area,
(Figure 5, Page 15)
adjust the Balance
so the amount of sound coming from the left and
right speakers is equal. Turn counterclockwise (left) to
reduce right channel level; turn clockwise (right) to
reduce left channel level.
Figure 26
Tone and Balance Controls
Vital 710 Front Panel
Vital 710 Remote
Vital 710 Front Panel