12
Vital 710 REmOTE FEATURES
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Vital 710 REmOTE FEATURES
39. LENS -
Infrared commands that control the Vital 710 are out-
put from LEDs hidden behind this lens. The lens should always
be pointed directly at the IR Sensor on the Vital 710 Front Panel
(Item 14, Page 6) when pressing buttons on the remote for arm-
chair control. The remote can control the Vital 710 up to 40 feet
away.
40. ON -
With the Vital 710 in Standby, (ON/Standby button back-
light OFF), press this button to turn the Vital 710 ON (ON/Standby
button backlight white).
41. SOURCE SELECT BUTTONS -
In Standby or with the Vital 710 power
ON, press one of these to select a desired source. The Front
Panel Display will indicate the selected source.
42. NUmERIC BUTTONS -
With AM or FM Tuner selected, press these
buttons to select programmed tuner preset channels. Channels
can be tuned directly by first selecting a Band (AM/FM) then
pressing the Direct button followed by the channel frequency
(94.7, 95.5, etc).
43. DIRECT -
With AM or FM Tuner selected, press this button, fol-
lowed by the appropriate numeric buttons to enter a channel
frequency. Direct In will scroll across the Front Panel Display fol-
lowed by the frequency numbers as they are pressed.
44. DImmER -
Press this button to control of the brightness of the Front
Panel Display. When the Vital 710 is turned ON, the Front Panel
Display will illuminate to full brightness. One press will dim the dis-
play to about half brightness, a second press will turn the display
OFF. A third press will restore full brightness to the display.
45. mEmORY -
With an AM or FM channel tuned, press this button to
store it as a Preset Channel. PRESET CH will appear on the Front
Figure 3
Vital 710 Remote Control Features
Panel Display and MEMO will flash slowly until a Preset Number is entered. Press 1-30 to store Preset. (The
Vital 710 can store up to 30 Presets total, AM and FM). Storing a channel on an already programmed Preset
will replace the existing Preset.
46. AUTO PRESET -
With the FM Band selected, press this button automatically program the Preset Channels with
the first 30 tunable FM channels found. The Vital 710 can store up to 30 Presets. If fewer than 30 FM channels
are found the Vital 710 will cycle the FM Band a second time to try to find more channels. The process will
stop automatically after the second cycle.
47. CURSOR ARRAY/OK -
With either the AM or FM selected, press the UP/DOWN buttons to tune the pro-
grammed Preset Channels. Press the LEFT/RIGHT buttons to increase/decrease the channel frequency by
one increment. The OK button has no function.
48. Fm mODE -
With the FM Tuner selected, press of this button to switch the FM Tuner between stereo and
mono modes. Typically, FM Mode should be left in the stereo mode. The mono setting can be useful for
cleaning up background noise when tuned to weak stereo channels.
49. PRESET -
With either the AM or FM Tuner selected, a press of this button will select the next previous pro-
grammed Tuner Preset. That is, if currently on Preset 4, a press of the Preset button will select Preset 3. If
Preset 1 is currently selected, the Vital 710 will return to the highest number programmed Preset. The select-
ed Preset Number is indicated on the Front Panel Display to the right of the tuned frequency.
PRESET -
With either the AM or FM Tuner selected, a press of this button will select the next programmed
Tuner Preset. That is, if currently on Preset 4, a press of the Preset button will select Preset 5. After selecting
the highest number programmed Preset, the Vital 710 will return to Preset 1. The selected Preset Number is
indicated on the Front Panel Display to the right of the tuned frequency.
