29
OPERATING THE Vital 710
Dimmer
Press the Dimmer button on the Vital 710 front Panel
or Vital 710 Remote to control of the brightness of the
Front Panel Display. When the Vital 710 is turned ON,
the Front Panel Display will illuminate to full brightness.
One press will dim the display to about half bright-
ness, a second press will turn the display OFF. A third
press will restore full brightness to the display.
Dimming the Front Panel Display may be desirable
when watching movies or other video content in a
darkened room, to reduce glare from the screen or if
the illuminated display is distracting.
SP. A B
Figure 31
Dimming the Front Panel Display
SP. A
Sleep Timer
With the Vital 710 ON and with any source selected,
press the Sleep button on the Vital 710 Front Panel or
Vital 710 Remote to turn on the Vital 710 Sleep Timer.
Sleep Timer durations from 90-10 minutes in 10 minute
increments can be set.
1.
Press the Sleep button. The Sleep Timer Setup will
appear in the Front Panel Display as shown in
Figure 32
. Repeatedly press the Sleep button until
the desired sleep timeout is set. When set, a red
clock icon will appear in the Front Panel Display
and the display will dim to half brightness.
2.
To check remaining time to OFF, press the Sleep
button ONCE. The remaining time to OFF will ap-
pear in the Front Panel Display and then return
to the dimmed, normal display. TWO presses will
cancel the Sleep Timeout.
Note:
With a Sleep Timeout set, the display can be
turned OFF with the Remote or Front Panel Dim-
mer buttons, but cannot be set to full brightness.
SP. A
Figure 32
Sleep Timer
Vital 710 Front Panel
Vital 710 Remote
Vital 710 Front Panel
Vital 710 Remote