b) Receiver (RX)
IR IN
CAT
HDMI OUT
9
10
12
11
13
9
HDMI OUT
Connect to an HDMI display device e.g. television
10
IR IN
IR receiver cable port. IR signal is to the
IR OUT
port of the transmitter.
11
Power indicator
When the receiver is connected to the power supply the indicator will light.
12
CAT
input port
Connect to the CAT input port of the transmitter using CAT5E/6 cable.
13
Digital signal indicator:
•
ON: HDMI signal with HDCP
•
Flashing: HDMI signal without HDCP
•
OFF: No HDMI signal
HDCP (High-bandwidth Digital Content Protection)
Connection
Disconnect all peripherals from the power supply before connection.
IR OUT
DC 12V
HDMI OUT
EDID
HDMI IN
CAT
IR IN
CAT
HDMI OUT
LAN
LAN
TX
RX
Troubleshooting
Problem
Suggestions
No image
• Turn on all connected devices.
• Check all cable connections.
• Select the correct television input.
• Use high quality HDMI cables.
• Disconnect then reconnect the transmitter from the power supply.
Playback device
does not respond
to the IR remote
control
• Place the IR transmitter and receiver at another location and/or
check they are within line of sight.
• The product is not compatible with the IR transmission protocol
used by your IR remote control.
• Press and hold the button on your IR remote control longer than
usual.
Care and cleaning
• Disconnect the product from the mains and peripherals before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the envi
-
ronment.
Technical data
a) General
Operating voltage/current ..... 12 V/DC, 1 A
HDMI Version ....................... 1.4
HDCP Version ...................... 1.4
DVI ........................................ 1.0
Video Bandwidth ................... 10.2 Gbps
Video Resolution .................. max. 4K 30 Hz
Supported resolution ............
max. 4K2K 30 Hz, YUV 4:4:4
Audio Support ....................... max. 7.1 CH HD audio
Transmission distance ..........
CAT5E: 60 m for 1080 p, 35 m for 4K 30 Hz
CAT6: 70 m for 1080 p, 40 m for 4K 30 Hz
Input TMDS Signal ............... 3.3 V
Input DDC Signal .................. 5.0 V/P-P
Operating conditions .............
0 to +40 ºC, 20 – 90 % RH (non-condensing)
Storage conditions ................
-20 to +60 ºC, 20 – 90 % RH (non-condensing)
Dimensions (L x W x H)
........ 79.5 x 69 x 16.5 mm
b) Transmitter
Input......................................
1x HDMI type A (19-pin female)
Outputs .................................
1x HDMI type A (19-pin female)
1x IR OUT (3.5 mm mini stereo jack)
1x CAT OUT (RJ45, 8-pin female)
Power consumption .............. 1.86 W
Weight .................................. 132 g
c) Receiver
Inputs ....................................
1x IR IN (3.5 mm stereo mini-jack)
1x CAT IN (RJ45, 8-pin female)
Output ...................................
1x HDMI Type A (19-pin female)
Power consumption .............. 0.87 W
Weight .................................. 130 g
d) Power Adaptor
Input voltage/current ............. 100 – 240 V/AC, 50/60 Hz, 0.3 A
Output voltage/current .......... 12 V/DC, 1 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in
-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE. *2356099_v1_0421_02_dh_m_en