This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
*1497182_v2_1116_02_DS_m_4L_(1)
Troubleshooting
Problem
Possible cause
Suggested solution
The splitter won't
turn on.
The power adapter is
not connected to the
mains.
Turn on the splitter using the
ON/
OFF
button.
Check that the power adapter is
plugged into a mains socket and that
it is connected to the splitter.
There is no image on
the display device.
The display device is
not switched on.
There is no HDMI
signal.
The cables are
damaged.
Switch on the display device.
Check that all cables are connected
correctly.
Ensure that the signal source is
switched on and connected.
Check that the HDMI cables meet
the necessary specifications and that
there are no signs of damage..
Image quality is poor.
The HDMI cables are
too long or do not
meet the necessary
specifications.
Check the HDMI cables meet the
necessary specifications, and ensure
that they are no longer than 8 m.
There is no audio.
The audio format
settings are incorrect,
or the signal source is
not delivering an audio
signal.
Check the audio format settings
and ensure that the signal sources
support the selected format.
The splitter does not
respond to the remote
control.
The plastic film in the
battery compartment
has not been removed.
The remote control
battery is empty.
Remove the plastic film from the
battery compartment.
Replace the battery.
Maintenance and cleaning
• Under no circumstances should you service any of the components in the interior of the
product, therefore never open/dismantle it.
• The device does not require maintenance except for occasional cleaning.
• Unplug the product from the power supply and any connected devices before cleaning it.
• Do not immerse the product in water.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or even impair the functioning of the product.
• Use a dry, soft, and lint-free cloth to clean the product. Do not press too hard on the surface
when cleaning, as this may lead to scratch marks.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
If a battery is inserted, remove it and dispose of it separately from the product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all used
batteries. Disposing of them in the household waste is prohibited.
Contaminated batteries are labelled with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for the heavy metals involved are:
Cd = Cadmium, Hg = Mercury, Pb = Lead (name on batteries, e.g. below the trash
icon on the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever
batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
a) HDMI splitter
Input voltage/current ........................................ 5 V/DC, 2 A
Input................................................................. 2 x HDMI
Output .............................................................. 4 x HDMI
Supported video resolutions ............................ 24 / 50 / 60 fs / 1080P / 1080i / 720p / 576p /
576i / 480p / 480i, 24 / 30 / 2160p
Deep Color ...................................................... 24 / 30 / 36-bit / 1080P / 1080i / 720p / 576p /
576i / 480p / 480i, 24-bit / 2160p
Supported HDMI audio formats (input/output) ... DTS-HD / Dolby-trueHD / LPCM7.1 / DTS /
Dolby-AC3/DSD
Supported digital audio formats ....................... LPCM2.0/Dolby AC3/DTS
Digital audio sampling rate (output) ................. 32 kHz, 44,1 kHz, 48 kHz, 88,2 kHz, 96 kHz,
176,4 kHz, 192 kHz
Audio sampling rate (for Toslink output) .......... 32 kHz, 44,1 kHz, 48 kHz, 88,2 kHz, 96 kHz,
176,4 kHz, 192 kHz
Digital audio output bandwidth ........................ Max. 25 MHz
Analogue audio signal (L/R RCA) .................... Max. 2 V P_P
Analogue audio output frequency .................... 50 Hz -18 kHz
HDMI bandwidth ............................................. Max. 300 MHz
Audio output interface ...................................... L/R+SPDIF
Transmission bandwidth ................................. 300 MHz
Transmission rate ............................................ 9 GBit/s
DDC signal (input/output) ................................ 5 V peak-to-peak (TTL)
TMDS signal (input/output) .............................. 0.5 - 1.5 V peak-to-peak
Supported cable lengths (input) .......................
≤ 8 m AWG 26 HDMI standard cable
Supported cable lengths (output) ....................
≤ 8 m AWG 26 HDMI standard cable
Operating current ............................................. Max. 700 mA
Operating conditions ....................................... 0 to +40 °C, 5 – 85 % RH (non-condensing)
Storage conditions .......................................... -10 to +55 °C, 5 – 90 % RH (non-condensing)
Dimensions (W x H x D) ................................. 205 x 26 x 74 mm
Weight ............................................................ Approx. 416 g
b) Remote control
Power supply ................................................... 3V lithium battery (CR2025)
Range .............................................................. 5 m
Dimensions (W x H x D) .................................. 90 x 10 x 41 mm
Weight ............................................................. Approx. 23 g
c) Power adapter
Input voltage/current ........................................ 100 - 240 V/AC, 50/60 Hz, 0.3 A
Output voltage/current ..................................... 5 V/DC, 2 A
Cable length .................................................... 147 cm (without plug)
