background image

GB

 4

The fireplace insert must never be modified! In particular, never insert any 
installation components into the combustion chamber, combustion passages 
or flue gas flue that have not expressly approved by SPARTHERM. Your 
fireplace warranty will be rendered invalid by any fireplace modification 
carried out using components not approved by Arcadia.

You may find that extractor hoods, ventilation equipment, etc., installed in 
the same room (or linked space) as your fireplace or stove, have a negative 
effect on the fireplace insert (such as the release of smoke into the room). 
These devices should not be used at the same time as your fireplace or 
stove, without first ensuring that the necessary room heating system pre-
cautions have been taken.

When using more than one fireplace in a single room or linked space , 
ensure that sufficient air is available for complete combustion!

This is a temporary fire area thus, longer continuous burning is not achieved 
by piling up the fire repeatedly. Continuous burning without piling up the fire 
in-between cannot be achieved even through withdrawal of the combustion 
air and is not permitted.
 
Transport damage: immediately on arrival, please check the goods delivered 
(visual inspection). Make a note of any damage on your delivery document. 
Inform your stove or fireplace fitter of the damage before the installation 
work begins. When installing the casing of your fireplace insert, take care to 
protect the viewing glass from damage or soiling.

The technical data of your fireplace insert can be found from Seite 4.

1. GENERAL INSTRUCTIONS

These installation instructions comply with the provisions outlined in DIN EN 
13229 "Solid-fuel fireplaces".

All national and regional regulations, standards and norms, methods of 
installation and material specifications must be observed. Naturally, all our 
fireplace inserts are subject to our own quality criteria, from incoming goods 
inspection to the approval before shipping.

Small children, elderly or infirm persons:
As is the case with all heating devices, it is expedient that you attach a 
protective fixture for these groups of persons, as the view pane and the 
cladding parts of the fireplace can become extremely hot!

 Danger of burn injuries! 

Never leave these groups of persons unattended near the fireplace insert 
when a fire is burning or has just been extinguished! Please ensure that 
persons belonging to these groups are made aware of the dangers.

No combustible objects

, materials or substances should be placed on or 

near the free surfaces of the fireplace system. Do not attempt to dry out 
clothing on the hot tiles of the fireplace system. When drying clothes, use 
a proper drying stand or clothes' horse and ensure it is placed outside the 
area of direct radiant heat!

The surfaces of your fireplace system such as the operating handles, doors, 
viewing glass, etc. are quickly made hot by heat energy released during the 
combustion process. Do not attempt to touch these components without 
adequate protection (i.e. 

heat-resistant gloves

).

Summary of Contents for Mini R1V 51









































Reviews: