Spartan 758 Water Jet, Owner'S Manual

Page: 11 / 74

Page 11
Water Tank Filling
Fill the water tank from a clean water source. Always flush rust out of hydrants before connecting fill hose (with
garden hose fitting) to top fill valve. Your water supply hose may remain connected for further filling by controlling
water flow at fill valve.
Important Note: (If the next 4 items are not followed, cavitation of the pump could occur and reduce operating
efficiency and severely damage the pump.)
— Use water temperatures under 140°F.
— Ensure that water strainer is clean (check daily or as needed).
— Make sure the strainer valve (between the tank and the pump) is fully open during operations. This valve
stops tank flow to allow strainer service.
— The pump drain valve must be closed. It must not drip when engine is off and strainer valve is open.
Operator Controls
15 amp Fuse
(Murphy Shutdown)
Murphy Shutdown
Relay Button
Ignition Switch
Choke
Turn to Lock
Throttle Control
Rewind Engage /
Disengage
Control
Pressure Gauge
Reel Supply
Valve
Rewind Push
Button Control
Circuit
Breaker
Rewind Air
Footswitch
Control (Quick
Disconnect)
Reel
Lock
Rewind Power
Switch
Hose
Holster