Page 13
Start Up
— Check water tank level. This water jet is equipped with a
Low Water Shut-Off
switch that will
prevent the engine from starting at low water levels.
— Check fuel level.
Note:
Also Check engine and pump oil levels per manufacturer specifications (attached).
— Turn high pressure reel supply valve “off”.
— Hold in red relay button and key start the engine. Choke as necessary.
— Allow the engine to warm up at idle for 3 to 5 minutes before putting engine under load.
Engine Shut-Down
— Turn high pressure reel supply valve “off”.
— Allow engine to idle for 1 to 2 minutes
— Turn the engine key switch
OFF
. (The engine key switch must be OFF when the engine is not running to
avoid battery draining.)
Engine Operating Procedure
Operator Controls (cont.)
Drain Valve
Summary of Contents for 758 Water Jet
