Note:
For Win10 system, the system device manager may not fully configure QuickLogic Thing Plus as COM
port when install for the first time, repeat step (3) to (6).
7. Launch PuTTY application and configure for Serial access and select “Open”.
8. Perform the followings in the PuTTY terminal:
a) Type: “
diag
” to bring up QuickLogic Thing Plus diagnostic menu
b) Type: “
help
” to bring up the menu of commands
c.) Type: “
red
”; the command shows red color for LED
d.) Type: “
red
”; the LED turns off the LED
e.) Try “
green
” and “blue” command
