User and Reset Buttons
The board includes a user button and hardware reset button. These are also connected to the edge of the board
as well. The reset pin is also connected to the SWD pin when connecting to a programmer.
Connecting Additional Peripherals to the QuickLogic Thing Plus
QuickLogic Thing Plus supports direct connection to FeatherWing module (providing that the FeatherWing module
has Stack Headers installed) via expansion connector J2 and J3. Refer to AdaFruit's web site for additional
information on available FeatherWing modules.
Sensor with I C Port
QuickLogic Thing Plus board supports connecting to sensor module with I C peripheral interface via expansion
connectors J2. You can also access the pins along the J9 header.
QuickLogic Thing Plus I C supports I C Standard mode (100KHz) and Fast mode (400KHz). There is one I C bus
available; additional I C IP can be implemented in EOS S3 FPGA.
2
2
2
2
2
2
