SpacePak ESPV2-109, Installation, Operation & Maintenance Manual, Page: 3 / 28

3
FAN COIL UNIT
90° PLENUM ELBOW
BM-3004
PLENUM END CAP
BM-3003
PLENUM DUCT (4FT LENGTH)
BM-3001
PLENUM ADAPTOR
BM-3007
PLENUM TEE
BM-3002
KWIK CONNECT
WALL ELBOW
AC-KCWE
PLENUM TAKE-OFF KIT
SUPPLY TUBING
KWIK CONNECT
BM-6818
SOUND ATTENTUATING TUBE
TERMINATOR PLATE
WINTER SUPPLY AIR SHUT-OFF
BALANCING ORIFICE
INSTALLATION KIT
COMPONENTS
SPL-0078B
RETURN AIR DUCT
RETURN AIR BOX
OR PURE PAK
RETURN AIR BOX (SPC-1D, AC-RBF-3, SPC-3D):
Each includes filter grill with metal frame, permanent
filter, and 2 clamp bands. SPC-1D is for ESP-2430V. AC-
RBF-3 is for ESP-3642V and SPC-3D is for ESP-4860V.
RETURN AIR DUCT (SPC-4,5, & 6) : Flexible, 10 feet
long with round shape. SPC-4 (15" dia.) for ESP-2430V.
SPC-5 (19" dia.) for ESP-3642V and SPC-6 (24" dia.) is
for ESP-4860V.
PLENUM ADAPTOR : 9" round OR 10" X 10" square
metal component to attach plenum duct to fan coil unit.
PLENUM DUCT & COMPONENTS: May be 9" round
sheet metal or 10" X 10" (O.D.) square, fiberboard duct
types as specified by the installing contractor. Above
layout is shown as an illustrative assembly reference
only.
PLENUM H (SPS-H-1): 10" X 10" (O.D.) fiberboard duct
component for use with ESP-4860V unit installations
(not shown).
SUPPLY TUBING (SPC-25-100): Flexible, insulated,
2" I.D. and 3 1 ⁄
4
" O.D. Each section is 100 feet long.
R6 SUPPLY TUBING (AC-ST6-75): Flexible, R6 insulated,
2" I.D. and 5- 3 ⁄
8
" O.D. Each section is 75 feet long.
R8 SUPPLY TUBING (AC-ST8-50): Flexible, R8 insulated,
2" I.D. and 6- 1 ⁄
4
" O.D. Each section is 50 feet long.
INSTALLATION KITS: Contains a specified amount
of sound attenuating tubes, kwik-connects, terminator
plates (incl. spring clips & screws), winter supply air
shut-offs and a balancing orifice set to complete
installation of room outlets. Supplied in (2) and (5) outlet
boxed quantities.
PLENUM TAKE-OFF KIT: Contains a specific amount of
plenum take-offs, gaskets and fasteners to complete
installation of room outlets. Take-offs available for round
sheet metal or square fiberboard duct as specified by
installing contractor. Supplied in (2) and (5) outlet boxed
quantities.
KWIK CONNECT WALL ELBOW (AC-KCWE): To allow
for wall terminations in 2" X 4" stud spaces.
PLIERS (SPC-72): To assure full setting of all clips
(fasteners) in plenum take-off (not shown).
PLENUM HOLE CUTTER (SPC-71-10): To cut 2" hole
in fiber board for plenum take-off installation (not
shown).
FIGURE 1.1: AIR DISTRIBUTION SYSTEM COMPONENTS