8
Software Version:
1.00
Hardware Version:
1.00
Tool Information
1. Battery In-Vehicle
2. Out Of-Vehicle
3. Review Data
4. Print Data
5. System Setup
Main Menu
1. Battery Test
2. Cranking Test
3. Charging Test
Test in-Vehicle
TOOL INFORMATION
From the tool setup menu, use the enter
button to select tool information.
Press exit to return to the previous screen.
BATTERY TEST
The SP61062 battery tester activates once the clamps have been correctly connected and
automatically enters the battery test program. It will display the following content in a sequence,
select accordingly.
BATTERY IN-VEHICLE OR BATTERY
OUT-OF-VEHICLE
Select UP/DOWN key to select the battery
location, in vehicle or out of vehicle. Then
press the ENTER key to confirm. Battery in
vehicle means the battery is connected to the
vehicles alternator. Battery out of vehicle
means the battery is not connected to the
vehicle at all.
BATTERY IN VEHICLE TEST
BATTERY IN-VEHICLE
For the battery in vehicle test, select BATTERY
IN VEHICLE, and press the ENTER key, the
below menu will appear.
BATTERY TEST IN-VEHICLE
When surface charge is detected by the
tester, it
prompts, “SURFACE
CHARGE, TURN
LIGHTS ON”.
Turn on lights as prompted to
eliminate battery surface charge.
Now the tester detect that the surface charge has been eliminated, turn of the lights as prompted,
then press the ENTER key. The tester will recover the automatic test.
1. Check surface charge, turn
lights on
2. Leave headlights
3. Turn headlights off
Battery Test
