
Hardware Setup
28
SY-6BB
Chapter 2
HARDWARE SETUP
In addition to the Installation Guide, this section is designed to help
you configure the motherboard hardware and to provide
complementary knowledge of the hardware. (This chapter is
designed for Normal edition motherboard use only.)
Warning: Turn off the power to the motherboard, system
chassis, and peripheral devices before performing any
work on the motherboard or system.
After you install the motherboard:
1. Set the CMOS clear jumper
2. Install memory
3. Make case connections
Refer to this chapter whenever you upgrade or reconfigure your
system.
2-1 CMOS Clear Jumper JP5
Clear the CMOS memory by momentarily shorting pin 2-3 on jumper
JP5, and then by shorting pin 1-2 to retain new settings. This jumper
can be easily identified by its white color cap.
Step 1
Step 2
CMOS Clearing
Clear CMOS Data
Retain CMOS Data
(Default)
JP5 Setting
Momentarily
short pin 2-3 to
clear the
CMOS
Short pin 1-2 to
retain new settings
3
2
1
3
2
1
Summary of Contents for SY-6BB
Page 70: ...Appendix Quick Start Guide...