
Introduction
26
SY-6BB
1-2 UNPACKING THE MOTHERBOARD
When unpacking the motherboard, check for the following items:
Ø
The SY-6BB 82440 BX AGP Set Motherboard
Ø
This Quick Start Guide
Ø
The Installation CD-ROM
Ø
The CPU Retention Set
Ø
One IDE Device Flat Cable
Ø
One Floppy Disk Drive Flat Cable
Ø
One 25-pin external serial connector with 9-pin flat cable
Ø
One dual 25-pin parallel with 25-pin flat cable and 9-pin serial
with 9-pin flat cable external connector
*If your board comes with a driver disc and a paper manual, the Quick Start Guide
and the CD-ROM are not included in the package.
Warning: Do not unpack the motherboard from its anti-
static packaging until you are ready to install it.
1-3 HANDLING THE MOTHERBOARD
To avoid damage to your motherboard, follow these simple rules
while unpacking:
Ø
Before handling the motherboard, ground yourself by
grasping an unpainted portion of the system's metal chassis.
Ø
Remove the motherboard from its anti-static packaging. Hold
the motherboard by the edges and avoid touching its
components.
Ø
Check the motherboard for damage. If any chip appears loose,
press carefully to seat it firmly in its socket.
Warning: Do not apply power if the motherboard appears
damaged. If there is damage to the board, contact your
dealer immediately.
Summary of Contents for SY-6BB
Page 70: ...Appendix Quick Start Guide...