Soyer UVR-300 Operating Instructions Manual Download Page 60

Page: 60 / 64

Operating instructions UVR-300/UVR-400 | Heinz Soyer Bolzenschweißtechnik

12 Spare and wear parts

The following lists contain the required conversion parts for changing the stud diameter
to be processed.

12.1 Feeder conversion set (M3 - M8)

To convert the universal feeders for another stud size, there is a conversion set
available with the parts (M3 - M8) which need to be changed.
The parts to be converted are labelled according to the stud diameter for which they
must be installed.

Figure 14: Conversion set UVR-300

– exchange parts (1)

Individual parts in the feeder conversion set

Item

Description

Dimension

Item no.

Adjustment plate (limit
stop distance plate)

F05343

F05344

F05345

F05346

Ø 7.1 mm

F05347

F05348

Hose connection

F04554

F04555

F04556

F04557

Ø 7.1 mm / M8

F04558

Threaded stud

M10 x 35 mm

B04673

Summary of Contents for UVR-300

































































Search results

Summary of Contents for UVR-300

Reviews:

Soyer UVR-300, Operating Instructions Manual, Page: 60 / 64

Search results

Summary of Contents for UVR-300

Reviews: