34
Operating instructions UVR-300/UVR-400 | Heinz Soyer Bolzenschweißtechnik
7 Converting the universal feeder
The universal feeder must be converted and/or readjusted when the stud type is
changed, according to the studs being used.
Always convert all the required parts, as malfunctions may otherwise occur.
To convert the universal feeder to another stud size, there is a conversion set available
with the parts to be changed.
The parts to be converted are labelled according to the stud diameter for which they
must be installed.
7.1.1
Conversion set for M3 - M8 (preferably for UVR-300)
Figure 8: Conversion set with replaceable parts for UVR-300
Item
Designation
a
Limit stop distance plates
b
Connection pieces for the stud feed hose
c
Threaded studs M10, aid to remove the stud retainer
d
Outlet rails with distance piece
All conversion set parts can be ordered separately. Please refer to chapter