32
16. Mode 6 Easy Guide
Enter the programming mode
Press * + 1 2 3 4 5 6 + #
(all new units are preprogrammed with the master code 123456)
The LED will flash green rapidly to show that the unit is in the programming mode. The
unit will time out and return to the reading mode in 30 seconds if no key is pressed.
Add one Transponder (Card / Key Tag) to the system
Step1: Press * and master code fallow an #
Step2: Enter 1 1 * 1 5 0 3 1 *
Starting Card Code
1 5 0 3 1 #
Ending Card Code
A green light and beep means that the transponder was accepted.
Step3: Press * #
Add a series of Transponders (Card / Key Tag) to the system
Step1: Press * and master code fallow an #
Step2: Enter 1 1 * 1 5 0 3 1 *
Starting Card Code
1 5 0 3 8 #
Ending Card Code
Set sequential transponder once and make a careful record. A green light and
beep means that the transponder was accepted.
Step3: Press * #
33
Add the common Code to the system
Step1: Press * and master code fallow an #
Step2: Enter 1 5 * 4 3 2 1 #
Common Code
All users can access the door by only entering common code (Default value:
4321) on the unit.
OR Enter 1 5 * 0 0 0 0 #
Common Code
This function is disable. All users cannot access the door by only entering common
code.
OR Enter 1 7 * 1 2 3 4 #
Common Code
All users can access the door by flashing card and entering common code
(Default value: 1234) on the unit.
OR Enter 1 7 * 0 0 0 0 #
User can access the door by flashing card on the unit.
Step3: Press * #
Set system clock times
Step1: Press * and master code fallow an #
(all new units are preprogrammed with the master code 123456)
Step2: Enter 2 5 * Y Y M M D D H H m
m S S #
YY: Year MM: Month DD: Date HH: Hour mm: Minute SS: Second
(Ex. 000125 = 25
th
January, 2000)
(Ex. 235901 = 23:59:01 PM)
Step3: Press * #
Other operation is same as AR-721H4 Easy Guide, for example, exit the
programming mode, change master code, door relay release time, delete one
or many transponder and so on.
34
17. Mode 7 Easy Guide
To exit the programming mode
Press * # -- exit the programming mode and return to the reading mode.
Set a user number arrive one floor
Step1: Press * and master code fallow an #
Step2: Enter 2 7 * 0 0 0 0 1 *
User Number
3 1 #
Access 31
st
floor
A green light and beep means that the setting was accepted.
Step3: Press * #
Set a user number arrive many floor
Step1: Press * and master code fallow an #
Step2: Enter 2 1 * 0 0 1 *
User Number
0 * 1 1 0 0 0 0 1 1 #
Group Access 8
th
, 7
th
, 2
nd
, and 1
st
floors
A green light and beep means that the setting was accepted.
Step3: Press * #
Group
Floor address
0
8 7 6 5 4 3 2 1
1
16 15 14 13 12 11 10 9
2
24 23 22 21 20 19 18 17
3
32 31 30 29 28 27 26 25
35
Set a AR-721R32 node address (AR-401RO16 don’t need to set this command.
It is set by DIP switch on the device)
Step1: Press * and master code fallow an #
Step2: Enter 2 4 * 0 0 1 #
AR-721R32 node address
A green light and beep means that the setting was accepted.
Step3: Press * #
Set the Relay time for push button and present card input of an elevator
controller
Step1: Press * and master code fallow an #
Step2: Enter 2 3 * 0 0 1 *
AR-721R32 node address
0 3 0 * 0 0 5 #
Pushbutton input Present card input
A green light and beep means that the setting was accepted.
Step3: Press * #
Note: AR-401RO16 has no push button input function, but you still enter push
button input second in order to complete this command. Otherwise, this command
will be failed).
Other operation is same as AR-721H4 Easy Guide, for example, enter the
programming mode, change master code, door relay release time, add / delete /
enable one or many transponder and so on.
