44
WARNING!
Always use a saw chain designed as
‘low-kickback’ or a saw chain which meets the low-
kickback requirements! A standard saw chain (a
chain which does not have the kickback reducing
guard links) should only be used by an experienced
professional operator! Nevertheless, a low-kickback
saw chain does not completely eliminate kickback!
A low-kickback or ‘safety’ chain should never be
regarded as complete protection against injury!
Therefore, always use a low-kickback saw chain in
conjunction with other kickback protection devices,
such as front guard/chain brake!
Align the guide bar (4) and saw chain (3) assembly with the
drive sprocket (11) and bolt (9). Lay the saw chain around the
drive sprocket and then lower the guide bar to install it to the
bolt (Fig. 39, 40).
Replace the cover (6) and slightly tighten the retaining nut (5)
Fig. 37
Fig. 38
Fig. 39
Fig. 40
