12
· Check the oil level before each work session, refill
if less than full. If the lubrication system does not
work properly, check if the oil filter and all oil-
ways are clean and free from obstructions. If it
is still not working, contact an authorised service
centre.
Safety Chain Brake
Kickback is a phenomenon whereby the tip of
the saw flies quickly and uncontrollably upwards
towards the operator. It happens with little or no
warning and can be caused by cutting with the blade
tip, if the saw gets pinched in its cut, or if the saw
contacts debris.
The risk of kickback can never be completely
eliminated but it can be reduced by:
· Ensuring the work area is free of debris.
· Not allowing the chain to get pinched.
· Not cutting with the danger area at the tip of the
saw (see illustration below).
Intended Use/Not intended Use
This chainsaw is only designed for cutting hedges,
trunks or timber beams up to a diameter according
to the guide bar length.
It is only allowed to cut wood. Every other use of the
