22
are just touching the bottom edge of the guide bar (4).
Turn the retaining nut clockwise to tighten the cover (6)
completely (Fig. 5).
Lubrication
WARNING!
The product is not filled with oil. It is
essential to fill the product with oil before using it.
Never operate the product without chain oil or with
an empty oil tank, as this will result in extensive
damage to the product.
Never operate the bar and chain without lubrication oil.
Operating the products dry or with too little oil will decrease
cutting efficiency, shorten the product life span and cause
rapid wear to the chain and bar from overheating. Insufficient
oil is evident by smoke or bar discoloration. Adequate
lubrication of the saw chain during cutting operations is
essential to minimise friction with the guide bar.
Fig. 4
Fig. 5
