29
use it as a leverage point while cutting (Fig. 15).
Reset the spike bumper at a low point when cutting thicker
logs by pulling the product slightly backwards until the
gripping teeth release, and then reposition at a lower level
to continue sawing. Do not remove the product completely
from the wood.
Do not force the saw chain while cutting. Let the chain do
the work using the gripping teeth to apply minimal leverage
pressure.
Do not operate the product with your arms fully extended or
attempt to saw areas which are difficult to reach, or while on
a ladder. Never use the product above shoulder height (Fig.
16).
Fig. 14
Fig. 15
Fig. 16
