6
7. Erect second A-frame and line up inside bolt hole
on the A-frame with corresponding bolt hole on the
cross beam. Place bolt through bolt hole on A-
frame and cross beam with washers on either side
of the bolt. Fully tighten both sets of bolts.
Gantry Height Adjustment
1. Unlock casters
Unlock both casters on the A-frame for which you will
be adjusting the height.
CAUTION
NEVER attempt to adjust the height
while the lift is holding a load.
CAUTION
Be certain trolley is centered and held
in place with set screw before
attempting to adjust A-frame height.
2. Adjust lifting handle location
Release the plunger pin on the lifting handle and slide
handle to desired position most convenient for lifting or
lowering A-frame height. Release plunger pin and be
certain it locks into place through pre-set holes before
attempting to make height adjustment.
3. Remove locking pin
1. With one hand lift on lifting handle. Remove locking
pin with other hand.
