background image

2

OWNER’S RESPONSIBILITIES

Throughout this publication, the words WARNING, CAUTION 

and IMPORTANT will be used to alert the user to special in-

structions concerning a particular operation that may be

hazardous if performed incorrectly or carelessly.

OBSERVE THEM CAREFULLY !!

WARNING 

Hazards or unsafe practices which could 
result in severe personal injury or death.

CAUTION 

Hazards or unsafe practices which could 
result in minor personal injury, product 
or property damage.

IMPORTANT  Indicates information or instructions that 

are necessary for proper operation and/
or maintenance.

Index

Introduction .........................................................................................3

Gantry Components ...........................................................................3

Operator Safety Instructions ...............................................................3

GH3/4T Gantry Lift Assembly ......................................................... 3-6

1. Erect A-Frame ..........................................................................4
2. Assemble Components ........................................................ 5-6

Gantry Height Adjustment............................................................... 6-7

1. Unlock casters .........................................................................6
2. Adjust lifting handle location .....................................................6
3. Remove locking pins ............................................................ 6-7

Gantry Span Adjustment.....................................................................7

Moving Gantry Lift ..............................................................................7

GH3/4T Gantry Specifications

 ............................................................8

Summary of Contents for Sumner GH3/4T-15









Reviews: