Southwestern Industries, Inc.
TRAK
EMX Knee Mill, Bed Mill & ProtoTRAK
EMX CNC Retrofit Safety, Programming, Operating & Care Manual
78
•
“Radius”. Your press .75, SET defining
the radius of the pocket.
•
“Direction”. You press
1, SET to select clockwise tool motion. We could have just as easily
selected counterclockwise.
•
“Fin Cut”. You press .02, SET to select a finish cut of .020 inches. When machining, the
program will hog out the pocket .020 undersized then make a finish cut pass to the proper
size.
•
“Feedrate”. You press
8., SET.
•
“Fin Feedrate”. You press 5., SET.
•
“Tool #”. You press SET.
•
"Tool Dia". You press SET.
Event 7 - The Through Rectangle
•
“Select Event”.
You press POCKET PROFILE soft key for Event 7.
•
“Select”. You press RECT PROFILE soft key for the rectangular profile.
•
“X1”. You press
3.75, ABS SET which is the distance to corner number 1, which we will say
is the lower left corner of the profile.
•
“Y1”. You press
1.75, ABS SET.
•
“X 3”. You press 1.5, INC SET because corner number 3 is the diagonal corner and it is 1.5
inches in the plus X direction from X1.
•
“Y3”. You press 1.25, INC SET.
•
“CONRAD”. You press .3, SET because the corner radius of t
he profile is .300 inch.
•
“Direction”. You press 2, SET to choose counterclockwise.
•
“Tool Offset.” You press 2, SET because when the tool moves counterclockwise around the
inside of the rectangle profile, it is to the left of the work piece.
•
“Fin Cut”.
You press .03, SET to select a .030 inch finish cut.
•
“Feedrate.” You press 5., SET.
•
“Fin Feedrate”. You press 2., SET.
•
“Tool #”. You press because we’re still using tool number 2.
•
"Tool Dia". You press SET.
