35
Southwestern Industries, Inc.
TRAK
EMX Knee Mill, Bed Mill & ProtoTRAK
EMX CNC Retrofit Safety, Programming, Operating & Care Manual
As data is being entered it will show in the conversation line. If you make a mistake, for
example, you press the wrong number key, you can clear the input by pressing
RESTORE. When
SET, the data will be transferred to the information area, and the next prompt will be shown in
the conversation line.
From the event data screen you may press the up arrow key to the upper right of the LCD screen
to go back to edit any data within an event.
Options within an event include:
PAGE FWD
: moves forward through the programmed events.
PAGE BACK
: moves backwards through the programmed events.
INSERT EVENT
: use this to insert a new event into the program. This new event will
take the place of the one that was on the right side of the screen when you pressed the
INSERT EVENT key. That previous event, and all the events that follow, increase their
event number by one. For example, if you started with a program of four events, if you
were to press the INSERT EVENT key while Event 3 was on the right side of the screen,
the previous Event 3 would become Event 4 and the previous Event 4 would become
Event 5. If you insert a Repeat event, the event numbers will increase by one as when
you insert another kind of event.
DELETE EVENT
: this will delete the event on the right side of the screen.
When all data for an event has been entered, the entire event will be shifted to the left side of
the screen and the conversation line will ask you to select the next event.
