![background image](http://html1.mh-extra.com/html/southern-states/cole-l/cole-l_installation-instructions-manual_1337418020.webp)
Page 11 of 17
Installation & Adjustment Procedures
3 Worm gear operator (SEGO – Safety Enhanced Gear Operator) (Optional)
3.1 The weight of the vertical operating pipe should be supported by pipe collar by
maintaining the ¼”-3/8” gap.
3.2 When the switch is properly adjusted the operator handle should hang freely in both
the open and closed positions to permit the use of the customer supplied padlock.
Figure 7: Type SEGO (Safety Enhanced Gear Operator)
3.3 Electrical motor operator
3.3.1 Please refer to motor operator instruction manual for proper installation
and setup.
3.3.2 Use manual operation while completing switch setup.
3.3.3
Do not
electrically operate until all switch adjustments are complete.
ALWAYS
operate the motor operator decoupled first to ensure proper
setup.
4 Preliminary Switch Settings:
4.1 Start with the disconnect switch and operating mechanism in the closed position.
Be aware that there is an adjustable stop on the operator.
Do not over operate as damage will occur to the operator.
Summary of Contents for COLE L
