Page 7 of 17
Installation & Adjustment Procedures
Preferred Switch Assembly Method:
If Disconnect switch is shipped assembled on insulators, ignore steps 3 and 4 (below).
1.
DO NOT CHANGE
any factory setting unless directed to do so in this manual.
2. These switches may be assembled on the structure or assembled on the ground and
hoisted to the structure, according to preference.
Exception: Vertically mounted
switches should always be assembled on the ground.
When assembling the switches
on the ground, so not attempt to make contact adjustments until the switch is mounted
on the structure. When lifting these switches, LIFT BY THE BASE ONLY.
3. Mount the insulators to the base mounting plates as shown in
, using the bolts
indicated in the field assembly bolt list (SF Drawing).
Figure 2: Insulator Attachment
4. Mount the live parts as shown in Figure 3. The mounting bolts are captive and already
in place.
Figure 3: Mounting Live Parts
Summary of Contents for COLE L
